RACEWAY LOCKING KIT

SDS-LK-KIT-ST
Category: Raceway Systems, SDS – 2” Square, Connectors,
Weight: 2 lbs
Dimensions: Raceway Lock Connector: Length 6" x Width 2" x Height 2". TopCap Starter: Length 6" x Width 2" x Height 2". Lock assembly: 2", not including 30" lanyard
International harmonized code: 8536908010

The Steel Raceway Locking Kit is required on each straight raceway segment to securely lock down the TopCap of the Secure Raceway. When locked, the entire raceway is fully covered and the enclosed cables are protected. Releasing the internal lock lanyard enables access to the raceway interior and network cabling; and facilitates moves, adds and changes (MACs). The Steel Locking Kit is also used to secure each Connector Cover. This product is the heart of Holocom's secure raceway patents.

LOCK BODY ASSEMBLY: 16-gauge electro-galvanized steel. Spring steel actuated locking mechanism with 30" lanyard cable protected by a hard plastic sheath. Two (2) steel spring clips to secure the lock body into place in the raceway. TOPCAP STARTER: 6" piece of 16-gauge electro-galvanized steel TopCap - only used with SDS Interface Sleeve (SDS-CT-INF-ST), SDS 90-degree Interface Sleeve (SDS-CT-INF90), or Through-Wall Kits containing Interface Sleeves. Powder Coat Finish: White Textured. LOCK CONNECTOR: 16-gauge electro-galvanized steel. Powder Coat Finish: White Textured.